Trains & Scenics
PL-82 Power Feed Joiners £ 7.50
PECO PL-82 : Power Feed Joiners
Scale: N Gauge
Code: 55 & Code 80 Rail
Brand New from PECO Lectrics for 2013..!
These power feed joiners will help address the worries of soldering that many modellers have: they're the safe, clean and tidy way of bringing power to the track. Supplied in packs of four pairs, each joiner has a short length of wire securely pre-soldered to it. The modeller just has to subsititute the standard metal joiners for a pair of these where the power feed is required, and pass the wires down through pre-drilled holes on the baseboard. With approximately 8 inches(204mm) of wire on each one there should be plenty of length available to go through most baseboards. In turn these wires can be connected to longer runs of wiring under the baseboard and be taken back to the outlet terminals of the transformer.
Each pack contains 4 (four) colour coded power feed /rail joiners, suitable for your N Gauge Code 55 /Code 80 Rail Track. Saves soldering wires to the old SL310's for sure..
The soldering is already done for you.. reduced risk of warping your track!!
Approx Weight: 0.055/ 0.065Kg Wrapped
You may also be interested in the following product(s)